An independent reference on updating the firmware of home devices. We do not host firmware files or repair devices, and we are not connected with the former site on this domain.

update without breaking it: a guide to firmware on home devices

Proshivki Portal: a guide to updating firmware safely

Almost every home has plenty of devices with a small computer inside: the router, phones, the TV, a camera by the front door, a smart speaker, a printer, a set-top box, and bulbs and plugs you control from your phone. Each of them runs firmware, and each one asks for an update now and then. We explain how to get through it calmly: where to get the update, how to prepare, what not to touch during installation and what to check afterwards.

An update put off “for later” tends to come back on the least convenient evening, so it is better to choose the time yourself.

— Editor's note

Where to start

Before you update

Charge the device or make sure its power supply is reliable, note down important settings, check the connection and free space, and read the release notes. A few minutes of preparation prevent most problems.

Router and camera

Network devices run around the clock and are visible to your whole home network, and sometimes to the internet. For them, up-to-date firmware and your own password instead of the default one are the first line of defence.

Phone and TV

These devices usually tell you themselves when a new version is out. All you need to do is pick a convenient moment, make sure they are charged or plugged in, and leave them alone until the installation is finished.

If something goes wrong

A frozen progress bar, a dark screen, missing settings. What you can do yourself by following the manufacturer's instructions, and when it is time to contact a service centre.

Guide sections

  • Guides

    Step-by-step advice on preparing for an update and updating your router, phone, TV, camera and smart home devices, plus the article catalogue.

  • Tools

    What to gather in advance: a charger and a reliable outlet, a network cable, your settings and passwords written down, a list of home devices and the manual.

  • Comparisons

    Automatic versus manual updates, official versus unofficial firmware, and whether to update right away or wait a little.

  • Problems

    An update is stuck, the device won't turn on, settings are gone, no new version is found, things got worse or there isn't enough space.

  • Security

    Default passwords, end of support, files from third-party sites, messages demanding an urgent update, remote access and selling a device.

  • Glossary

    Plain-language definitions: firmware, version, release notes, vulnerability, automatic updates, reset, recovery mode, bootloader.

  • Questions

    Answers about this guide, about everyday updates for home devices and about avoiding tricks that use the word “firmware” as bait.

Updating a router: five steps

  1. Find out the model and current version

    Open the router's settings page in a browser on a computer or phone connected to your home network and find the section with device information. Note down the exact model name, the hardware revision if one is shown, and the number of the installed firmware version.

  2. Find the update from an official source

    Many routers can check for a new version on their own: the button for this is usually tucked away under maintenance or system settings. If there is no such feature, get the file only from the manufacturer's official website, on the support page for your exact model and revision. Forums, file-sharing sites and “custom builds” from strangers will not do.

  3. Save your settings

    The same menu usually lets you save the configuration to a file. Use it and keep the file somewhere you will be able to find it later. Separately, write down your wireless network name and password, as well as your internet provider connection details if you ever entered them manually.

  4. Update over a cable and leave the power alone

    Connect your computer to the router with a network cable, because a wireless connection can drop during installation. Start the update and wait until the router restarts on its own and shows the settings page again. Don't pull the plug, don't press the buttons on the device and don't close the browser tab too early, even if everything seems to have frozen.

  5. Check the result and change the default password

    Make sure the device information shows the new version, the internet works and your home devices are back online. If the settings are still protected by the default password, replace it with your own long password that you don't use anywhere else, then turn on automatic updates if the router supports them.

The essentials

Can I download a firmware file from you?

No. We don't host firmware files or link to them. Get updates only through the device's built-in update feature or from the manufacturer's official website: that way you know the file is right for your model and nobody has tampered with it along the way.

Can I install unofficial firmware?

We don't recommend it and we don't explain how it is done. Unofficial firmware can void your warranty, turn the device into a useless box or bring in malicious code that you install with your own hands. The promised new features are rarely worth such risks.

Should I update if everything already works?

Yes. Updates fix not only visible glitches but also vulnerabilities: weak spots you won't know about until someone exploits them. A device can work perfectly and still be a door left ajar into your home network.

What if there are no more updates?

Most likely the manufacturer has ended support for that model. The device will keep working, but nobody will fix new vulnerabilities in it. For a router or camera, that is a reason to think about replacing it; for a bulb or set-top box, at least don't expose it to the internet and, if your router allows it, keep it on a separate guest network.

About

Proshivki Portal is an independent reference. It has no connection with earlier websites on this domain and does not reproduce their content.

We write about updating the firmware of home devices safely: why updates matter, where to get them, how to prepare, what to do during and after installation, what to do if an update fails and what end of support means. We do not host firmware files, repair devices, name brands or models, or cover unofficial reflashing.

  • Guides

    Step-by-step advice on preparing for an update and updating your router, phone, TV, camera and smart home devices, plus the article catalogue.

  • Problems

    An update is stuck, the device won't turn on, settings are gone, no new version is found, things got worse or there isn't enough space.

  • Security

    Default passwords, end of support, files from third-party sites, messages demanding an urgent update, remote access and selling a device.

  • Comparisons

    Automatic versus manual updates, official versus unofficial firmware, and whether to update right away or wait a little.

  • Glossary

    Plain-language definitions: firmware, version, release notes, vulnerability, automatic updates, reset, recovery mode, bootloader.

Sources

  • Device manufacturers' instructions (in general terms)
  • Security recommendations for home network devices (in general terms)
  • Proshivki Portal editorial material

These articles are written in general terms and reflect the editors' view as of the date they were prepared. Home devices update in different ways: some do everything on their own, others need you to open the settings, and menu items are named differently everywhere. The final word belongs to your device manufacturer's instructions: if they differ from our advice, follow the instructions.