An independent reference on updating the firmware of home devices. We do not host firmware files or repair devices, and we are not connected with the former site on this domain.

Glossary

Glossary of terms

Update messages are often written as if the reader were an engineer: “new build installed”, “vulnerabilities fixed”, “the device will enter recovery mode”. Here these terms are explained in plain language, without technical detail and without instructions that could harm your devices.

Knowing what a bootloader is helps; touching it without a pressing need does not.

— Editor's note

How this section works: the definitions are short and avoid numbers. The terms are grouped into basic concepts, security and support, and recovery and reset.

Basic concepts

Firmware
The software that lives inside the device itself and controls how it works, from switching on to showing menus. Routers, TVs, cameras and even smart bulbs have their own firmware, and users usually see only its outer layer, the settings.
Version
The label for a specific firmware release. The version number tells you whether the latest update is installed; it is usually shown in the device information section.
Release notes
A short description of what is new in a release: fixed bugs, patched vulnerabilities, new features. It is worth reading before installing so you know what to expect.
Automatic updates
A mode in which the device checks for and installs new versions on its own. For most home devices, it is the most reliable way to keep up with security fixes.

Security and support

Vulnerability
A flaw in software that an outsider can exploit to gain access to a device or data. Security updates close vulnerabilities discovered after the device was released.
End of support
The point after which the manufacturer no longer releases updates for a model. The device keeps working, but new vulnerabilities in it are no longer fixed.
Default password
The password set by the manufacturer out of the box. Change it right after setting up the device and after every reset.
Official source
The device's own built-in update feature, the manufacturer's companion app or the support page on the manufacturer's website. These are the only places to get firmware from.

Recovery and reset

Settings backup
A file or record of the device's settings: the network name, passwords, rules. It lets you quickly put everything back as it was after an update or reset.
Factory reset
Returning a device to the state it was in when you bought it: settings, accounts and personal data are erased. Needed before selling a device and sometimes when troubleshooting.
Recovery mode
A special mode the manufacturer provides in case the device doesn't start normally. Use it only by following the official instructions and with official files.
Bootloader
A small program that runs first when the device is switched on and hands control over to the main firmware. Manufacturers protect it from changes, and tampering with it is a common cause of dead devices. We do not provide instructions for working with the bootloader.
  • Comparisons

    Automatic versus manual updates, official versus unofficial firmware, and whether to update right away or wait a little.

  • Guides

    Step-by-step advice on preparing for an update and updating your router, phone, TV, camera and smart home devices, plus the article catalogue.

  • Problems

    An update is stuck, the device won't turn on, settings are gone, no new version is found, things got worse or there isn't enough space.

  • Tools

    What to gather in advance: a charger and a reliable outlet, a network cable, your settings and passwords written down, a list of home devices and the manual.

  • Questions

    Answers about this guide, about everyday updates for home devices and about avoiding tricks that use the word “firmware” as bait.

Sources

  • Device manufacturers' instructions (in general terms)
  • Security recommendations for home network devices (in general terms)
  • Proshivki Portal editorial material

These articles are written in general terms and reflect the editors' view as of the date they were prepared. Home devices update in different ways: some do everything on their own, others need you to open the settings, and menu items are named differently everywhere. The final word belongs to your device manufacturer's instructions: if they differ from our advice, follow the instructions.