An independent reference on updating the firmware of home devices. We do not host firmware files or repair devices, and we are not connected with the former site on this domain.

Problems

Troubleshooting

Most updates go by unnoticed, but sometimes the progress bar freezes, the screen stays dark for a long time or familiar settings disappear after a restart. Panicking and pressing every button in sight is the worst thing you can do at that moment. Here are typical situations and calm steps that won't make things worse.

A stuck update is usually just a slow one; the real trouble starts when someone interrupts it.

— Editor's note

How this section works: situations and likely causes are described in general terms. We don't advise opening the case, shorting contacts or hunting for “miracle files” on forums: official recovery methods are described in the manufacturer's instructions, and anything beyond that is a job for a service centre.

Common situations

The update is stuck.

First, wait longer than seems reasonable: some stages are slow, and the progress bar can sit still for a long time. See whether the indicator lights are on or anything is blinking. Don't cut the power unless the manufacturer's instructions explicitly allow it, and if they explain what to do about a stuck installation, follow them.

The device won't turn on after the update.

Check the simplest things first: the outlet, the power cable, the battery charge. Then find the recovery section in the manufacturer's instructions; many devices have an official recovery mode or a way to restore a working version. If nothing helps, contact the manufacturer's support or an authorised service centre rather than a random repair shop.

The settings are gone.

Sometimes an update resets some options to their factory values. Restore them from your saved backup or from your notes. If you have no backup, start with the essentials: the network name and password, the admin password and the connection to your internet provider.

“No update found.”

You may already have the latest version, the update may be rolling out gradually and not have reached your device yet, or the model may no longer be supported. Check the support page on the manufacturer's official website. Don't look for a “newer” version on third-party sites: it may not suit your model or region.

Things got worse after the update.

Restart the device and give it time: after a major update it can run more slowly for a while as it rebuilds everything. Check whether a follow-up fix has been released. Going back to the previous version is not possible on every device, and only by the methods the manufacturer describes; do-it-yourself rollbacks often end with a device that doesn't work. If the problem is serious, report it to the manufacturer's support.

There isn't enough space.

Delete apps you don't need, old videos and downloaded files, or move your photos to a computer or an external drive. Temporary files can be cleared through the device's own settings. Don't delete system files, and don't trust third-party “cleaners” that promise to free up space by magic.

If an update was interrupted

  1. Don't rush

    If the power went out or someone pulled the cord by accident, don't keep switching the device on and off. Wait until the power supply is stable.

  2. Turn it on and watch

    Turn the device on once and give it time. Many devices can resume the installation or roll back to the previous version on their own, and this can take quite a few minutes.

  3. Find the official instructions

    Open the device manual or the support page on the manufacturer's official website and look for how to recover from a failed update. Follow it to the letter.

  4. Use only official recovery

    If the manufacturer provides a recovery mode or a special procedure, carry it out with its official files and tools. Don't take files from forums or copy what you see in random videos.

  5. Don't take the device apart

    Opening the case and trying to get at the circuit board usually voids the warranty and can ruin the device for good. This is not a situation where boldness pays off.

  6. Contact a service centre

    If the device still won't come back to life, contact the manufacturer's support or an authorised service centre. Explain what happened and at what stage the update was interrupted; this will help find a solution faster.

  • Guides

    Step-by-step advice on preparing for an update and updating your router, phone, TV, camera and smart home devices, plus the article catalogue.

  • Tools

    What to gather in advance: a charger and a reliable outlet, a network cable, your settings and passwords written down, a list of home devices and the manual.

  • Comparisons

    Automatic versus manual updates, official versus unofficial firmware, and whether to update right away or wait a little.

  • Security

    Default passwords, end of support, files from third-party sites, messages demanding an urgent update, remote access and selling a device.

  • Glossary

    Plain-language definitions: firmware, version, release notes, vulnerability, automatic updates, reset, recovery mode, bootloader.

Sources

  • Device manufacturers' instructions (in general terms)
  • Security recommendations for home network devices (in general terms)
  • Proshivki Portal editorial material

These articles are written in general terms and reflect the editors' view as of the date they were prepared. Home devices update in different ways: some do everything on their own, others need you to open the settings, and menu items are named differently everywhere. The final word belongs to your device manufacturer's instructions: if they differ from our advice, follow the instructions.